Enter Bootloader Boot Mode on the Samsung Galaxy M31s (8GB RAM +128GB)
Bootloader (BL) is a piece of code executed before the user’s operating system loads. It enables hardware to boot, runs automated tests on hardware and serves as a bridge between the user’s system and the hardware. When the device is powered on, Bootloader works to start its OS. On the Samsung Galaxy M31s (8GB RAM +128GB) device, Bootloader Boot Mode allows you to perform different operations like updating software, wiping data, resetting cache, and flashing new firmware. In this guide, we’ll show you how to enter Bootloader Boot Mode on your Samsung Galaxy M31s (8GB RAM +128GB).
Why Enter Bootloader Boot Mode?
- Flash new firmware and update software
- Restore your device to its original state
- Wipe data, reset cache and more
- Test and troubleshoot your device
- Unlock the device
How to Boot into Bootloader Mode on Samsung Galaxy M31s (8GB RAM +128GB)
Entering Bootloader Boot Mode on the Samsung Galaxy M31s (8GB RAM +128GB) can be done by following the steps below:
- Press and hold the Volume Down and the Power buttons together until you enter Fastboot Mode. You will see the Bootloader Lock State at the top of the screen, and a schematic image of the + and – Volume buttons, as well as a back button and a power button.
- Use the Volume Down button to select the ‘Bootloader’ option and press the Power button to confirm.
- Your device will now reboot into Bootloader Boot Mode.
- You can also enter Bootloader Boot Mode by issuing the following ADB command:
- adb reboot bootloader
Conclusion
That’s it – you have successfully entered Bootloader Boot Mode on your Samsung Galaxy M31s (8GB RAM +128GB). From here, you can perform different operations like updating software, wiping data, resetting cache, and flashing new firmware. It is a great tool to test and troubleshoot the device, as well as unlock it. We hope this guide was helpful and that you found it useful.