How to Boot into Bootloader Mode in Samsung Galaxy M12 (6GB RAM + 128GB)

The Samsung Galaxy M12 is a budget phone that comes with some great features. It is powered by an Exynos 850 Octa-core processor and has 6GB RAM + 128GB of internal storage. It also comes with a 6.4″ FHD+ LCD display and a massive 6,000 mAh battery.

Getting into Bootloader Mode in the Samsung Galaxy M12 is fairly straightforward. You will need a PC or Mac with access to the internet.

How to Boot into Bootloader Mode in Samsung Galaxy M12

Step 1: Power Off the Device
Make sure the device is switched off before blanking it into Bootloader Mode.

Step 2: Connect the Device to the PC
Using a USB cable, connect the Samsung Galaxy M12 to the PC.

Step 3: Enter Bootloader Mode
Press and hold the Volume Up button and then press the Volume Down and Power buttons at the same time. Keep them pressed until the device boots up into Bootloader Mode.

Step 4: Check Your Device
Once the device is in Bootloader Mode, the PC will detect it automatically. You can check to ensure that your device is connected by running the “adb devices” command in the command prompt on the PC.

Step 5: Configure Your PC
If needed, configure the PC to recognize the Samsung Galaxy M12. To do this, you will need to install the appropriate USB drivers for the device; these can be found on Samsung’s official website.


Knowing how to boot into Bootloader Mode on the Samsung Galaxy M12 is essential for many reasons, such as being able to reset the device, flash new firmware, and troubleshoot issues. Hopefully this article has shown you the steps needed to successfully enter Bootloader Mode on the Samsung Galaxy M12.


Leave a Reply

Your email address will not be published. Required fields are marked *